如何從3D設計軟件Unigraphics??UG?輸出STL格式文件
File > Export > Rapid Prototyping
Set Output type to Binary
Set Triangle Tolerance to 0.0025
Set Adjacency Tolerance to 0.12
Set Auto Normal Gen to On
Set Normal Display to Off
Set Triangle Display to On
- 文件>導出>快速成型
- 設置輸出類型設置為二進制
- 設置三角公差為0.0025
- 設置鄰接公差為0.12
- 設置自動正常艮為開
- 設置正常顯示為關閉Off
- 設置三角形顯示為開啟 On
本文地址http://www.3dmold.com.cn/knowledge/964.html