如何從3D設計軟件SpaceClaim?保存為STL格式文件
Save As
Save as type: STL
Select "Options..."
Format = Binary
Choose whether design, component or body
Under the Resolution box pick "fine" as a minimum.
(we recommend Custom with the first slider at "0.4mm", the second set to "5" or less)
Click OK
另存為
保存類型：STL
"選擇“選項...”
格式=二進制
選擇是設計，零部件或?qū)嶓w
根據決議框中挑選“精”是最起碼要求。
(我們推薦定制與第一滑塊“0.4毫米”，第二組為“10”或以下)
單擊OK（確定）
本文地址http://www.3dmold.com.cn/knowledge/961.html